光沢のあるマットボップサーマルラミネーションフィルム

DECRIPTION OF PRODUCTS

Environmentally friendly

It is environmentally friendly, non-hazardous to health and safe to use as no toxic gases or volatile content is emitted. Safety in laminating process as no solvent based adhesive is used.

Easy handing

It is easy to operate once the required temperature is met and no special technique required.

Efficient and energy-saving

Production cost is reduced substantially as there is no film wastage, mixture of adhesive solvent, and no UV heating lamp is required.

Adaptable to different kinds of machines

This film is recommended to be used in dry laminator. Small adjustments need to be made to the machine if the film is used in wet laminator.

Process Parameter

Equipment for laminating film: dry and wet film laminator

Temperature: Normal:85~100°C

Special:100~110  °C

Roller pressure:10~18Mpa

Speed:8~50m/min

Remarks: Special laminations refer to those with thicker ink, solid color, high moisture content and bigger size paper.

Application manually

1. Adjust roller pressure and temperature according to different types of paper and ink.

2. When using the film for the first time or changing to other sizes, we recommend a small trial volume before going into fully mass lamination.

3. The following situation will affect the quality of the film during lamination.

1. When using metal ink.

2. When the ink contains too much wax, dried oil, adhesive, and silicon additive. etc.

3. When the ink is too thick.

4. When the ink is not completely dry.

5. When the paper contains too much moisture.

6. When there is too much powder.